Projectors

Projector throw ratio explained (with golf screen examples)

One formula decides where your projector goes. How to use it, with worked examples for common simulator screens.

By FOREference Editorial · Updated 30 Sep 2026

The short answer

Throw ratio = distance from lens to screen ÷ image width. Rearranged, throw distance = throw ratio × image width. A projector with a 0.5 throw ratio filling a 10 ft wide image sits 5 ft from the screen; a 1.2 ratio needs 12 ft. Golf simulators favor short-throw projectors (about 0.4 to 1.0) so the projector can sit above or in front of the golfer without shadows or a swing hazard.

The formula

FOREference calculationThrow distance (ft) = throw ratio × image width (ft). Image width for a given screen: 16:9 width = diagonal × 0.87; 4:3 width = diagonal × 0.8. A 10 ft wide image with a 0.7 ratio needs a lens 7 ft from the screen.

Zoom lenses list a throw ratio range (for example 0.69 to 0.83), which gives you some flexibility in where you mount. Use the projector throw calculator to work out your position.

Short-throw, standard and ultra-short-throw

Projector types for simulators
TypeThrow ratioTypical mountingNotes
Ultra-short-throwUnder about 0.4Floor or very close to the screenAvoids shadows; may need a protective cage
Short-throwAbout 0.4 to 1.0Ceiling above or just in front of the golferThe common simulator choice
Standard throwAbout 1.2 to 2.0Far back behind the golferNeeds a deep room and risks shadows

Worked examples

Throw distance for common simulator screens
Screen (image width)Throw ratio 0.5Throw ratio 0.7Throw ratio 1.0
8 ft wide4 ft5.6 ft8 ft
10 ft wide5 ft7 ft10 ft
12 ft wide6 ft8.4 ft12 ft

With a 10 ft wide image and the golfer standing about 8 to 10 ft from the screen, a ratio of about 0.5 to 0.7 places the projector above or in front of the golfer's head, out of the line of shadows and out of the swing.

Lens shift, offset and keystone

  • Lens shift moves the image up, down or sideways without distortion, giving freedom in where you mount.
  • Offset means the image is projected above or below the lens center; check it so the image lands on the screen at your ceiling height.
  • Keystone correction fixes angles digitally but softens the image; avoid relying on it.
  • Aspect ratio: match the projector to your screen (4:3, 16:9 or 16:10). See the projector guide.

Questions readers ask

What throw ratio is best for a golf simulator?
Short throw, about 0.4 to 1.0, so the projector sits above or in front of the golfer without casting shadows or entering the swing.
How do I calculate projector throw distance?
Multiply the throw ratio by the image width. A 0.6 ratio and a 10 ft wide image need 6 ft.
Can I use a standard projector for a golf simulator?
Only in a deep room with the projector far behind the golfer, which often causes shadows. Short-throw models suit most rooms.
Do I need lens shift?
It helps a lot: lens shift lets you place the image precisely without keystone distortion.

Figures marked as FOREference calculations show their working; product figures come from the sources on each product page. How we work