Launch monitors

Marked balls and club stickers: which launch monitors need them

Which launch monitors need marked balls or stickers, what you gain from them, and what they cost to keep using.

By FOREference Editorial · Updated 30 Sep 2026

The short answer

Some launch monitors need marked balls or metallic ball stickers to measure spin indoors, and some camera units need club-face stickers for club data. They work, but they add ongoing cost and a little hassle. Units that read any ball and club without markings avoid both.

What each one unlocks

Markings and the launch monitors that use them
ItemUsed by (per listings)Unlocks
RPT-marked ballsRapsodo MLM2PROMeasured spin rate and axis
Metallic ball stickersFlightScope Mevo+, Mevo Gen2 and X3C indoorsSpin measurement in a short indoor flight
Club-face stickersForesight GC3, GCQuad, QuadMAX, Falcon; Bushnell Launch Pro; Garmin R50Club data such as path and face

Each product page shows the exact marking requirement from its listing under Fit check.

Why they are needed

Radar units need to see the ball spinning over enough flight to measure spin; indoors the flight is short, so a metallic sticker or special marking gives the radar a clear reflection to track. Camera units read club data from the face at impact, and reflective stickers make the face's position and orientation easy for the cameras to find.

Living with them

  • Stickers wear and need replacing; sellers sell refill packs.
  • Marked balls are premium balls; budget for replacements as they scuff.
  • Apply club stickers to a clean, dry face in the maker's specified position, or club data will be wrong.
  • Keep a few spare marked balls; a session without them loses spin data.
FOREference calculationOngoing cost example: if you replace a dozen marked balls twice a year at about $50 a dozen, that is roughly $100 a year, comparable to some launch monitor memberships.

Units that read any ball

Overhead camera units such as VTrack, Uneekor and ProTee VX list any-ball reading without club stickers, and some side-mounted camera units also need no markings. If markings bother you, compare those in overhead launch monitors and launch monitors with the most club data. See also data parameters explained.

Products mentioned

Questions readers ask

Why does my launch monitor need marked balls?
Indoors, radar units see only a short ball flight; markings or metallic stickers let them measure spin in that distance.
Do I need club stickers for a Foresight launch monitor?
For club data on Foresight's camera units (GC3, GCQuad, QuadMAX, Falcon), yes; ball data works without them.
Which launch monitors work with any golf ball?
Overhead camera units such as VTrack, Uneekor and ProTee VX list any-ball reading; check each product page.
How often do launch monitor stickers need replacing?
When they peel, scuff or stop reading reliably; frequent players replace them regularly and buy refill packs.

Figures marked as FOREference calculations show their working; product figures come from the sources on each product page. How we work