Room planning

Lighting a golf simulator room

How to light a simulator so the image stays bright, the launch monitor reads every shot and the room is safe to swing in.

By FOREference Editorial · Updated 30 Sep 2026

The short answer

Light the hitting area, not the screen. Aim ceiling fixtures down at the golfer and away from the screen, block windows behind or beside the screen, and use flicker-free LED fixtures, since flicker can interfere with high-speed camera launch monitors. Separate dimmable zones for the hitting area and seating give the best image and the safest room.

Keep light off the screen

Any light that reaches the impact screen lifts the black level and washes out the image, which matters more than projector resolution. A darker room lets a modest projector look great; a bright room needs far more lumens.

  • Place ceiling lights behind and above the golfer, angled away from the screen.
  • Use fixtures with narrow beams or baffles to control spill.
  • Block or cover windows that face the screen; blackout blinds work.
  • Paint the walls and ceiling near the screen a dark, matte color to cut reflections.
FOREference calculationIf the room cannot be darkened, plan on about 4,000 lumens or more instead of 3,000. Use the brightness calculator for your screen size.

Lighting for camera launch monitors

Photometric launch monitors read the ball with high-speed cameras, and many use their own infrared lighting. Strong sunlight, flickering lights or reflective surfaces near the hitting area can interfere. Follow each maker's lighting and placement guidance, and run a session before permanently mounting an overhead unit.

  • Choose flicker-free LED drivers; cheap dimmers can introduce flicker.
  • Avoid bright sunlight falling directly on the hitting area.
  • Keep shiny surfaces such as glossy tiles or mirrors out of the camera's view.

Fixtures and placement

A simple simulator lighting plan
ZoneFixturePlacement
Hitting areaFlicker-free LED downlights or a linear LEDAbove and slightly behind the golfer
Seating areaDimmable downlightsBehind the hitting area
AccentLow-level LED stripsAlong walls, away from the screen
Practical noteKeep fixtures out of the swing arc and use recessed or low-profile lights under lower ceilings. See ceiling height.

Safety

A room dark enough for a great image can be too dark to see a mishit or a person stepping into the hitting area. Keep the hitting area lit and the seating area dimmable rather than switching everything off.

Questions readers ask

What lighting is best for a golf simulator?
Flicker-free LED downlights aimed at the hitting area and away from the screen, with separate dimmable zones for the seating area.
Does lighting affect launch monitors?
It can affect camera launch monitors: sunlight, flicker and reflective surfaces may interfere. Follow the maker's guidance.
Should a golf simulator room be dark?
The screen should be in darkness; the hitting area should be lit for safety and for camera launch monitors.
How do I stop windows washing out my simulator screen?
Use blackout blinds or covers on windows facing or beside the screen, or choose a brighter projector.

Figures marked as FOREference calculations show their working; product figures come from the sources on each product page. How we work