Hitting mat · SIGPRO

SIGPRO DIY Encosure Landing Pad

SIGPRO · sold by Golf Simulators Direct

The short answer

The SIGPRO DIY Encosure Landing Pad is a hitting mat from SIGPRO, offered in 10 size or configuration options. Golf Simulators Direct lists it from $700 (up to $1,300 for the largest configuration).

Category
Hitting mat
Options
10 sizes
Sellers
1
Price seen
$700+

Good fit if

    Look elsewhere if

    • You need space for a side-of-ball launch monitor beside the stance
    $699.99Golf Simulators Direct listed price (configurations to $1,300) · seen 30 Sep 2026

    Every link opens the product page for this exact model. We may earn a commission; it never changes what we publish. Disclosure

    Hitting mat: what you get

    The hitting mat is the surface you strike from every shot, so joint comfort, how it takes a real tee, and whether it suits your launch monitor all matter.

    Sizes offered

    Size or configurationArea
    8'4 W x 8'4 H x 5' D (1:1)69 sq ft
    10'4 W x 10'4 H x 5' D (1:1)107 sq ft
    10'4 W x 7'11 H x 5' D (4:3)82 sq ft
    10'10 W x 8'4 H x 5' D (4:3)90 sq ft
    12'2 W x 9'4 H x 5' D (4:3)114 sq ft
    12'10 W x 9'10 H x 5' D (4:3)126 sq ft
    13'7 W x 10'4 H x 5' D (4:3)140 sq ft
    13'7 W x 7'11 H x 5' D (16:9)108 sq ft
    14'2 W x 8'4 H x 5' D (16:9)118 sq ft
    15'4 W x 9'10 H x 5' D (16:10)151 sq ft

    Planning notes

    Launch monitors that sit beside the ball read it from a few inches above the floor, so the unit and the hitting surface need to be at a matching height, and the mat must leave room on the monitor side. Radar units behind the ball and overhead units don't care about mat width.

    For shared left- and right-handed use, a center- or double-hitting mat avoids moving the whole mat. See the left-handed setup guide.

    Fit check

    Checks to make against your room and equipment before ordering.

    ✓ Required? Check firsti Good to know
    • ✓SizeOptions: 8'4 W x 8'4 H x 5' D (1:1), 10'4 W x 10'4 H x 5' D (1:1), 10'4 W x 7'11 H x 5' D (4:3), 10'10 W x 8'4 H x 5' D (4:3), 12'2 W x 9'4 H x 5' D (4:3), 12'10 W x 9'10 H x 5' D (4:3)…
    • ?Room fitMeasure the floor area and ceiling before ordering; allow space to assemble.
    • iDeliveryLarger items may ship by freight or in several boxes; confirm lead time and returns with the seller.

    Specifications

    Each figure is labelled with where it comes from. Numbered references link to the source list below.

    Manufacturer storeRetailer listingFOREference calculationNot verified

    Published specifications

    Sizes offered8'4 W x 8'4 H x 5' D (1:1), 10'4 W x 10'4 H x 5' D (1:1), 10'4 W x 7'11 H x 5' D (4:3), 10'10 W x 8'4 H x 5' D (4:3), 12'2 W x 9'4 H x 5' D (4:3), 12'10 W x 9'10 H x 5' D (4:3), 13'7 W x 10'4 H x 5' D (4:3), 13'7 W x 7'11 H x 5' D (16:9), 14'2 W x 8'4 H x 5' D (16:9), 15'4 W x 9'10 H x 5' D (16:10)[S1]Retailer listing

    Limitations to weigh

    • Specifications are the seller's; FOREference has not measured this product.

    Alternatives worth comparing

    Where to buy

    Our link opens this exact product page. Prices and stock change; check before you order.

    $699.99Golf Simulators Direct listed price (configurations to $1,300) · seen 30 Sep 2026

    Every link opens the product page for this exact model. We may earn a commission; it never changes what we publish. Disclosure

    Questions buyers ask

    What sizes does the SIGPRO DIY Encosure Landing Pad come in?
    8'4 W x 8'4 H x 5' D (1:1), 10'4 W x 10'4 H x 5' D (1:1), 10'4 W x 7'11 H x 5' D (4:3), 10'10 W x 8'4 H x 5' D (4:3), 12'2 W x 9'4 H x 5' D (4:3), 12'10 W x 9'10 H x 5' D (4:3), 13'7 W x 10'4 H x 5' D (4:3), 13'7 W x 7'11 H x 5' D (16:9), 14'2 W x 8'4 H x 5' D (16:9), 15'4 W x 9'10 H x 5' D (16:10)
    Where can I buy the SIGPRO DIY Encosure Landing Pad?
    1 specialist seller list it: Golf Simulators Direct.

    Sources and verification

    1. Golf Simulators Direct — SIGPRO DIY Encosure Landing Pad — product page and specifications Retrieved 30 Sep 2026

    FOREference has not tested this product hands-on. This reference is compiled from the sources above; our calculations are labelled and show their working. Last verified 30 Sep 2026. How we work